DEEP SOURCE PASS · 2026-07-20
DATA GRADE A-

Vector (Carlson Motorsports)

Vector DO dirt oval flat kart / LO206-style speedway kart. Numbers below come from public manufacturer sheets or sanction rulebooks. We do not invent missing values.

Wheelbase

VALUE
Not printed as a single WB number on free Vector setup page
Setup page publishes hub offsets, scale %, PSI, caster — not overall WB

Published geometry & baseline numbers

LR hub face from axle end
4" (34" axle ref)
RR hub face from axle end
2-1/2" (34" axle ref)
Front stagger
Typically ½" · max 1½" extreme
Camber (Vector DO)
LF 0° · RF +2° positive start (builder note: opposite some brands)
RF camber with wide tire
8"+ RF tire start −1½°; high grip −2½°
Toe
Short flat dirt: 1/8" toe-out · large/pavement: 1/16" toe-in · never >1/8 either way
Cold PSI dirt slicks start
LF 6 / RF 8 / LR 6 / RR 8 (after 25 psi seat-in)
Left side target
57% LS / 43% RS
Cross weight
53–54% (typically 3–4% under left side)
Rear weight start
52–62% band · start ~55% then free until too loose
Caster short track / banked / HP
LF 15° · RF 18° (center mark 15° on adjuster)
Caster high-speed oval
LF 9° · RF 12° · keep split ≤3°
RR in to tighten entry
Move RR in ½"
LO206 mid-window (class)
Stagger 0.75–1.75" · left 56–62% · PSI window 9/11/8/10
Seat position is primary scale tool on Vector DO. Torsion bar called a band-aid for improper setup except extreme rough/sticky rubber.

Primary sources

Always verify against your exact year chassis and series rulebook. Setup sheets change by year.
LOAD INTO GARAGE
Interactive mid-window card
FLAT LO206 DEMO → PREFILL CHASSIS

Manufacturer correction

If a number is wrong for a specific year, email the correction with a sheet PDF. We will update grade and sources.

REPORT / CLAIM DATA